6 Series 645Ci (N62) Coupe
51 16 245
Removing and installing/replacing lock
cylinder for storage box
Necessary preliminary tasks:
•
Remove storage compartment
Disconnect connector (1).
Disconnect Bowden cable (2).
Release screws (3) and remove lock mechanism (4).
Important!
Ignition key must be inserted in lock cylinder otherwise coding
of lock cylinder may fall out.
Proceed with extreme care when releasing catches (2).
Catches (2) must not break off.
Carefully release catches (2) and pull out lock (1) with ignition
key.
RA Removing and installing/replacing lock cylinder for storage box
BMW AG - TIS
18.01.2013 09:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
