bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Replacing Mirror Glass > < 4 RA Removing And Installing_replacing Mounting For Cup Holder At Front
Page 1
background image

51 16 000

Removing and installing/replacing mirror on
left or right front door

Necessary preliminary tasks:

Remove front door trim panel

Remove speaker (tweeter)

Partially remove sound insulation in front door

Release cable ties (1).

Lever out clip (2) and disconnect plug connection (3).

Feed wiring harness (4) out of cable duct (5).

Installation:

If necessary, replace faulty clip (2).

Fold rubber guide (1) to one side.

Release screws (2) and feed out mirror (3) with wiring harness.

Installation:

Tightening torque 51 16 1AZ.

Replacement:

Due to the self-tapping screws, the tightening torque of the new
mirror is increased by 2 Nm.

Tightening torque 51 16 1AZ.

Installation:

Sound insulation (1) on mirror (2) must not be damaged.

Check function.

RA  Removing and installing/replacing mirror on left or right front door

BMW AG - TIS

18.01.2013  09:25

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

6 RA Replacing Mirror Glass > < 4 RA Removing And Installing_replacing Mounting For Cup Holder At Front