6 Series 645Ci (N62) Coupe
51 24 165
Removing and installing/replacing side left or
right buffer stops on rear lid
Special tools required:
•
00 9 317
Note:
The operation is described on the left side; proceed in the same
way for the right side.
Release expander rivets (1) on trim panel for rear lid.
Lever out buffer stop (1) with special tool 00 9 317 at fastening
points (2).
Installation:
Adjust both buffer stops (1) (work is described in Adjusting rear
lid lock).
RA Removing and installing/replacing side left or right buffer stops on rear lid
BMW AG - TIS
18.01.2013 09:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
