6 Series 645Ci (N62) Coupe
Removal of power window unit
1.
Feed out front window lift rail
2.
Feed out rear window lift rail
Installation:
Insert adjusting plate (1) on rear window lift rail (3) correctly into
guide on window lift support (2).
Replacement:
Release screws (1) and detach flat motor (2).
Tightening torque 51 33 2AZ
.
Installation:
Carry out normalization of power window unit.
Basic settings of power window unit:
Height adjustment via wedge (1).
Measurement (A) = 3 ... 4 mm
RA Removing and installing (replacing) power window unit in left or right front doo
BMW AG - TIS
18.01.2013 09:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
