6 Series 645Ci (N62) Coupe
51 47 066
Removing and installing/replacing illuminated
finishing strip on front left or right entrance
Special tools required:
•
00 9 317
Necessary preliminary tasks:
•
Remove inner entrance cover strip
•
Move front seat completely towards rear and upwards
Lever out mucket (1) at bottom.
Grip carpet (2) under front seat and disconnect plug
connection (3).
Detach butylene tape (5), carefully detach cable (4) from
seal (6) and feed out.
Installation:
Make sure cable (4) is correctly positioned on bead for
mucket (1),
Stick on new butylene tape (5).
Unclip clips (1) for finishing strip (2) with special tool
00 9 317 .
Remove finishing strip (2).
RA Removing and installing/replacing illuminated finishing strip on front left or r
BMW AG - TIS
18.01.2013 10:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
