6 Series 645Ci (N62) Coupe
Installation:
Catches (1) on holder (2) must not be damaged.
Installation:
If necessary, detach holders (1) from body and fit on panel (2).
If necessary, replace faulty holders (1).
Replacement:
Masking stickers (3 and 4) must be attached to bottom of
panel (2).
If necessary, attach masking stickers (3 and 4) in
moist
bonding process.
Replacement:
Stoneguard film (1) must be stuck onto panel (2) at rear.
If necessary, attach stoneguard film (1) in moist bonding process.
Positioning via contours (A and B).
RA Removing and installing or replacing panel for cover on left or right side membe
BMW AG - TIS
18.01.2013 10:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -