6 Series 645Ci (N62) Coupe
54 10 200
Removing and installing complete glass tilt
sunroof
Necessary preliminary tasks:
•
Remove roofliner
•
Remove glass tilt sunroof lid
Important!
A second person is required to help in removing the glass tilt
sunroof.
Cover door sill with protective covers (risk of damage).
Do not damage any surrounding parts when removing slide/tilt
sunroof (5).
-
Unlock and disconnect plug for drive unit for floating roofliner (1) and glass tilt sunroof lid (2).
-
Unclip wiring harness (3).
-
Glass tilt sunroof is inserted into body in area (4) and thus secured against falling out.
-
Secure glass tilt sunroof in front area against falling out by supporting it.
-
Release screws in marked area from rear towards front.
Tightening torque: 54 10 6AZ
-
Remove slide/tilt sunroof (5) completely (through front door).
Installation:
Do not crush any cables when fitting the glass slide/tilt sunroof.
RA Removing and installing complete glass tilt sunroof
BMW AG - TIS
18.01.2013 10:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
