bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Replacing Battery Positive Lead (from Battery To Luggage Compartment Connector)|Page 2256 > < 1 RA General Information On Intelligent Battery Sensor (IBS)
Page 1
background image

61 12 002

Replacing battery positive lead (from battery
to luggage compartment connector)

Warning!

Observe safety instructions for handling vehicle battery.

Follow instructions for disconnecting and connecting battery.

Observe notes on power supply / on intelligent battery sensor
(IBS).

Necessary preliminary tasks:

Remove luggage compartment mat, luggage compartment

floor panel and tray insert cover

Disconnect battery negative lead

Remove luggage compartment wheel arch trim on left.

Unscrew nuts (1).

Remove underlay for floor panel at rear left (2).

Remove underlay for luggage compartment floor panel (3).

Slacken nut (1) of safety battery terminal. Tightening torque 
61 21 1AZ

.

 

Important!

Do not under any circumstances use force to pull off safety
battery terminal.

 

Disconnect battery positive lead with safety battery terminal from
battery.

Disconnect plug connection for safety battery terminal (2).

RA  Replacing battery positive lead (from battery to luggage compartment connector)

BMW AG - TIS

18.01.2013  10:36

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Replacing Battery Positive Lead (from Battery To Luggage Compartment Connector)|Page 2256 > < 1 RA General Information On Intelligent Battery Sensor (IBS)