bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Replacing Wiring Harness For Front Bumper > < 2 RA Replacing Battery Positive Lead (from Battery To Luggage Compartment Connector)|Page 2256
Page 1
background image

61 12 013

Replacing battery negative lead

Warning!

Observe safety instructions for handling vehicle battery.

Follow instructions for disconnecting and connecting battery.

Observe notes on power supply / on intelligent battery sensor
(IBS).

Necessary preliminary tasks:

Remove luggage compartment mat, luggage compartment

floor panel and tray insert cover

Remove right luggage compartment wheel arch trim

Remove underlay for floor panel (1).

Loosen nut (2). Tightening torque  61 21 1AZ

.

 

Important!

Do not under any circumstances use force to pull off pole
shoe.

Do not under any circumstances release socket-head cap
screw of IBS.

 

Detach battery negative lead (5) with IBS in upward direction
from battery.

If necessary, disconnect plug connection (3).

Disconnect plug connection (4) for IBS.

Release nut (6) and disconnect battery negative lead (5).
Tightening torque  61 21 2AZ

.

RA  Replacing battery negative lead

BMW AG - TIS

18.01.2013  10:36

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Replacing Wiring Harness For Front Bumper > < 2 RA Replacing Battery Positive Lead (from Battery To Luggage Compartment Connector)|Page 2256