6 Series 645Ci (N62) Coupe
61 31 052
Removing and installing/replacing centre
console switch cluster
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove trim for storage tray
Release screws (1).
Unclip centre console switch cluster (2) in direction of arrow from
trim for storage tray (3) and remove.
Installation:
Make sure centre console switch cluster (2) engages correctly in
trim for storage tray (3).
Replacement with build date up to 09/2006:
Cut 0.75 mm
2
cable to approx. 15 cm length.
Crimp 0.75 mm
2
jack (61 13 0 006 663) on prepared cable.
Open plug housing.
Insert jack of prepared cable in pin 5 of 13-pin plug X14056.
Connect cable with 2-part connecting piece (61 13 8 364 566)
to lead of 13-pin plug X14056 exiting from pin 7.
Carry out programming/coding.
RA Removing and installing/replacing centre console switch cluster
BMW AG - TIS
18.01.2013 10:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
