6 Series 645Ci (N62) Coupe
63 99 002
Replacing halogen bulb for left (or right) high-
beam headlight (up to 09/2007)
Warning!
Version with xenon headlights: Danger to life due to high
voltage! Therefore, before removing, disconnect all
components from the power supply (lighting system and
ignition off).
Work on the entire xenon lighting system (control unit, ignition
unit with bulb) may only be carried out by specialist personnel.
Follow instructions for handling light bulbs (exterior lights).
Note:
Removing the pull cables on the hood/bonnet lock is only required
for replacing the halogen bulb for the left high-beam headlight.
Unclip housing (1) at points (2).
Remove cover (3) from housing (1).
Unclip engine hood lock pull cable (1) in area (2) and disengage
at point (3).
Place housing (4) with associated pull cables in working area to
one side.
Installation:
Make sure hood/bonnet lock pull cables are correctly laid.
Unlock catch (1) and remove cap (2) in direction of arrow.
Installation:
Make sure seal is correctly fitted on cover (2) and cover (2) is
correctly seated on headlight.
RA Replacing halogen bulb for left (or right) high-beam headlight (up to 09/2007)
BMW AG - TIS
18.01.2013 11:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
