6 Series 645Ci (N62) Coupe
64 52 524
Replacing A/C system compressor (N62)
Warning!
Risk of injury!
Follow safety instructions for handling R 134a refrigerant .
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil.
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Read and comply with notes on replacing compressor.
Follow instructions for opening and replacing parts in
refrigerant circuit!
If A/C system is opened for more than 24 hours:
Replacing drier insert for A/C system
Necessary preliminary tasks:
•
Drawing off, evacuating and filling the A/C system are not
included in the time value given for this work operation
•
Remove front assembly underside protection
•
Remove A/C compressor drive belt
•
Release stabilizer on front axle
Important!
Do not place front panel centre section (2) on jump
start terminals.
Do not kink Bowden cables for engine hood locking.
Release screws (1).
Remove front panel centre section (2) in direction of arrow and
place to one side.
RA Replacing A/C system compressor (N62)
BMW AG - TIS
18.01.2013 11:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
