6 Series 645Ci (N62) Coupe
64 52 524
Replacing A/C system compressor (N62, with
Dynamic Drive)
Warning!
Risk of injury!
Follow safety instructions for handling R 134a refrigerant .
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil.
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Read and comply with notes on replacing compressor.
Follow instructions for opening and replacing parts in
refrigerant circuit!
If A/C system is opened for more than 24 hours:
Replacing drier insert for A/C system
Necessary preliminary tasks:
•
Drawing off, evacuating and filling the A/C system are not
included in the time value given for this work operation
•
Release coolant tank and place to one side
•
Remove alternator drive belt
•
Release stabilizer on front axle
Important!
Do not place front panel centre section (2) on jump start
terminals.
Do not kink Bowden cables for engine hood/bonnet locking.
Release screws (1).
Remove front panel centre section (2) in direction of arrow and
place to one side.
RA Replacing A/C system compressor (N62, with Dynamic Drive)
BMW AG - TIS
18.01.2013 11:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
