6 Series 645Ci (N62) Coupe
Important!
Secure ACC sensor (2) against falling out.
Disconnect plug connection (2) and remove sensor (1).
After installation:
Carry out ACC sensor adjustment using BMW diagnostic system.
Replacement:
Carry out rough adjustment of ACC sensor (1).
If necessary, perform rough adjustment at retaining pins (2).
•
Measurement A [mm]: 42.5 to 43.5
RA Removing and installing (replacing) ACC sensor
BMW AG - TIS
18.01.2013 12:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
