6 Series 645Ci (N62) Coupe
67 11 555
Removing and installing/replacing servodrive
for tank filler flap
Necessary preliminary tasks:
•
Remove luggage compartment floor trim panel.
•
Disconnect battery negative lead.
•
Remove right luggage compartment wheel arch trim.
Release screws (1) and remove servodrive for tank filler flap (2)
from retaining plate.
Installation:
If necessary, carry out adjustment of servodrive for tank filler
flap (2) via elongated holes (3). It must be possible to lock or
unlock the fuel filler flap completely.
Unfasten plug connection (1) and disconnect.
Unclip tank filler flap Bowden cable (2) in direction of arrow from
servodrive for tank filler flap (3).
Unhook emergency actuation pull strap (4) from clip (5).
Remove servodrive for fuel filler flap (3).
RA Removing and installing/replacing servodrive for tank filler flap
BMW AG - TIS
18.01.2013 12:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
