6 Series 645Ci (N62) Coupe
Note:
The following work step ends here:
Removing and installing/replacing front seat belt (automatic reel)
Removing and installing/replacing front left or right lower strap
(seat belt tensioner)
Necessary preliminary tasks:
•
Remove front seat
Note:
If a seat belt which is damaged due to an accident is exchanged,
always check the belt tensioner retaining bracket on the seat rail
for damage (bending) and replace if necessary.
A bent seatbelt tensioner retaining bracket on the seat runner may
make it impossible to adjust the height of the seat!
Detach cable strap (2).
Unlock plug connection (1) for belt tensioner and disconnect.
Release screw (3) and remove belt tensioner.
Tightening torque 72 11 06AZ
.
Installation:
Replace microencapsulated screw.
Replace cable strap.
Plug connection (1) on belt tensioner must not be under strain.
Installation:
Check that cable holder is in correct position on belt tensioner.
RA Removing and installing/replacing front seat belt (complete)
BMW AG - TIS
18.01.2013 12:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
