6 Series 650i (N62TU) Coupe
12 32 501
Replacing controller switch for alternator
(N62, N62TU)
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove alternator
Carefully insert a screwdriver between cover (1) and threaded
pin.
Lever out cover (1) towards top.
Release contact screws (1).
Slacken nut (2).
Remove controller switch (3).
Check contact surfaces (1) of slip rings for wear and recondition
if necessary.
RA Replacing controller switch for alternator (N62, N62TU)
BMW AG - TIS
18.01.2013 22:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -