6 Series M6 (S85) Coupe
Replace filter element.
Release screw (1).
Installation:
Replace sealing ring.
Tightening torque: 11 13 1AZ
.
Release screw (2).
Installation:
Replace sealing ring.
Tightening torque: 11 13 1AZ
.
Warning!
Danger of scalding!
Carry out all tasks only when wearing oil-resistant, heat-
resistant protective gloves incl. underarm protection, face
guard and protective apron.
Open screw plug (1) with socket and a long extension (2).
Installation:
Replace sealing ring.
Tightening torque: 11 13 1AZ
.
Tilt long extension (1) with socket and screw plug in direction of
arrow.
Catch and dispose of engine oil with suitable equipment.
Pour in engine oil.
Park vehicle on a horizontal surface.
Start engine and run at idle until an engine oil temperature
≥
70
°
is
reached.
Press on-board computer button for longer than 3 seconds.
Determine oil level.
RA Engine oil service (S85)
BMW AG - TIS
19.01.2013 13:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -