6 Series M6 (S85) Coupe
11 31 034
Removing and installing / replacing right inlet
camshaft (S85)
Special tools required:
•
11 5 241
•
11 5 242
•
11 5 243
Necessary preliminary tasks:
•
Remove right cylinder head cover
•
Remove right VANOS adjustment unit
•
Remove right VANOS exhaust gear
•
Remove right VANOS inlet gear
Important!
Use only special tool 11 5 241 to remove and install
camshafts.
To remove and install inlet camshafts, insert special tool
11 5 243 in direction of arrow in special tool 11 5 241 .
Secure special tool 11 5 241 to cylinder head on right with
special tool 11 5 242 .
Important!
Screw in special tool 11 5 242 to max. 30 Nm .
Rotate eccentric shaft (2) at hexagon head and pretension.
Lock (1) must snap clearly and audibly into place.
RA Removing and installing / replacing right inlet camshaft (S85)
BMW AG - TIS
19.01.2013 13:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
