6 Series M6 (S85) Coupe
Important!
In 1st cylinder firing TDC position only the inlet camshafts of
cylinders 1-5 and 6-10 can be
checked.
In the 39
°°°°
position only the exhaust camshafts of cylinders 1-
5 and 6-10 can be checked.
Crank engine at central bolt until 1st cylinder firing TDC position
appears on vibration damper.
Secure vibration damper in position with special tool 11 5 320 .
In camshaft position for cylinders 1-5, the designation E1 must be
able to be read on the dihedron.
If necessary, crank engine at central bolt.
In camshaft position for cylinders 6-10, the designation E2 must
be able to be read on the dihedron.
If necessary, crank engine at central bolt.
Position of camshaft in 1st cylinder firing TDC position.
The cams at the 1st cylinder on the inlet camshaft point upwards
at an angle.
The cams at the 1st cylinder on the exhaust camshaft point to the
exhaust side at an angle.
Designation E1 must be legible on dihedron (1).
Designation A1 is only legible from above in the 39
°
position.
RA Checking camshaft timing (S85)
BMW AG - TIS
19.01.2013 13:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -