6 Series M6 (S85) Coupe
Pull back lever on special tool 11 5 281 .
Valve keys (1) can now be ejected from the working
chamber (2).
Remove special tool 11 9 006 .
All the engine valves are now accessible.
Installation:
Set the engine valves down in neat and tidy order if they are to be
reused.
Check valve seat for damage.
Important!
The cylinder head must be replaced if the valve seat is
damaged.
Remachining the valve seat ring is not permitted.
Important!
Use only special tool 11 5 282 to install the valve keys - risk
of damage!
Press valve key (1) in direction of arrow into special tool
11 5 283 .
Secure valve keys (1).
RA Removing and installing / replacing all valves (S85)
BMW AG - TIS
19.01.2013 13:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
