6 Series M6 (S85) Coupe
Align special tool 11 6 251 with its measuring shaft (2) vertically
to gearwheel (1).
Rotate high-pressure pump gearwheel (1) up to stop.
Set special tool 11 6 251 to zero.
Rotate high-pressure pump gearwheel in direction of arrow up to
stop.
Backlash at high-pressure pump min. 0.06 to max. 0.08 mm.
If necessary, correct VANOS high-pressure pump adjustment.
Adjustment of VANOS high-pressure pump (2) with a rubber
mallet on pump housing.
Tightening torque 11 36 8AZ
.
RA Removing and installing / replacing VANOS high-pressure pump (S85)
BMW AG - TIS
19.01.2013 13:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -