6 Series M6 (S85) Coupe
Release hexagon socket screws with washers (1 and 2).
Installation:
If reusing the VANOS gear, replace hexagon socket screws with
washers (1 and 2).
Illustration shows cyl. 6-10.
Important!
Release central bolt only when inner sleeve (1) with
elongated holes is at left stop.
Pull VANOS gear with outer sleeve forwards until inner
sleeves (1 and 2) with elongated holes are at left stop.
Join screws (3 and 4) to 10 Nm .
Attach special tool 11 5 381 .
Fit special tool 11 5 410 with bolts (3).
Important!
Release central bolts (1 and 2) with special tools 11 5 410
and 11 5 381 only.
Risk of damage to VANOS gear.
Note:
•
If the special tool 11 5 410 cannot be fitted due to the
hexagon socket screws being unfavourably positioned, it is
necessary to remove the two or if necessary four hexagon
socket screws.
Release central bolt (1).
Remove special tool 11 5 410 .
RA Removing and installing / replacing right exhaust VANOS gear (S85)
BMW AG - TIS
19.01.2013 13:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -