6 Series M6 (S85) Coupe
13 54 030
Removing and installing/sealing throttle valve
assembly (S54)
Special tools required:
•
34 3 171
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Follow instructions for disconnecting and connecting battery
•
Disconnect battery negative lead and cover
•
Remove intake air manifold
Removing throttle valve assemblies 6 - 10:
Release screws and detach injection pipe (1) from throttle valve
assemblies.
Remove pull rod (2).
Unlock plug (3) and remove.
Unclip lines (1).
Release bolts and remove cover (2).
Tightening torque 13 54 2AZ
.
RA Removing and installing/sealing throttle valve assembly (S54)
BMW AG - TIS
19.01.2013 13:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
