6 Series M6 (S85) Coupe
13 54 544
Removing and installing/replacing left Hall
sensor (S85)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Switch off ignition
•
Follow instructions for disconnecting and connecting battery
•
Disconnect battery negative lead and cover
•
Remove intake air manifold
Release nut and remove line (1).
Tightening torque 12 52 2AZ
.
Remove cover (2) from control unit for ionic current.
Unlock plug (3) and remove.
Release screw and remove holder (1).
Release wiring harness from retaining clip (2).
Disconnect lead (3).
Unlock plug (1) and remove.
Release screw and carefully raise cable duct (2).
RA Removing and installing/replacing left Hall sensor (S85)
BMW AG - TIS
19.01.2013 13:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -