6 Series M6 (S85) Coupe
13 90 500
Replacing tank venting valve (S85)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit; if necessary,
work through test schedules
•
Switch off ignition
•
Remove intake air manifold
Note:
The tank venting valve is fitted under the intake air manifold.
Note:
Illustration shows and description refers to the left tank venting
valve. The procedure is identical for the right tank venting valve.
Unlock plug (1) and remove.
Unlock hose (2) on tank venting valve and disconnect.
Release clamp (3), detach hose.
Release screw.
Remove tank venting valve (4).
Note:
Now clear the fault memory.
RA Replacing tank venting valve (S85)
BMW AG - TIS
19.01.2013 13:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -