6 Series M6 (S85) Coupe
Screw in bolts uniformly in 1/2 turns.
Adhere to sequence 1 to 9 when releasing bolts.
Note:
Illustration does not show special tool 21 2 300 .
Important!
Double-plate clutch must not be disassembled or opened.
If the double-plate clutch is opened however, it must be
replaced complete with pressure plate.
Check inspection line (3) on double-plate clutch.
Intermediate pressure plate (1) and pressure plate (2) are
balanced in relation to each other and marked with an inspection
line (3).
The clutch must be replaced if the marking (3) no longer matches
up.
Clamp special tool 21 2 300 with handle in a vice.
Release lock (1) in direction of arrow.
Raise double-plate clutch (3) in direction of arrow.
Installation:
Install new double-plate clutch (3).
Retaining hooks (2) must be locked.
Installation:
When installing the clutch, ensure that springs (1) are exactly
adjusted to fit in flywheel bores (2).
Important!
Clutch must be installed without tension.
RA Removing and installing/replacing clutch (GS7S47BG SMG)
BMW AG - TIS
19.01.2013 14:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
