6 Series M6 (S85) Coupe
21 54 507
Replacing clutch position sensor (GS7S47BG
SMG)
Important!
After completing work:
-
Perform adaptation using DIS Tester, refer to Service
Functions in DIS Tester (Replacement and Repair)
-
Read out fault memory and clear entered faults.
Failure to comply with this requirement will result in serious
damage to the manual transmission.
Necessary preliminary tasks:
•
Remove exhaust system.
•
Remove centre underbody protection.
•
Remove reinforcement plate.
Important notes on installation are described in this work
step.
Remove heat shields (1) and (2).
Remove heat shields (1) and (2).
RA Replacing clutch position sensor (GS7S47BG SMG)
BMW AG - TIS
19.01.2013 14:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -