6 Series M6 (S85) Coupe
23 00 613
Removing and installing transmission
(GS7S47BG SMG)
Special tools required:
•
00 2 030
•
23 0 131
•
23 0 132
•
23 0 139
Important!
After completing work:
-
Carry out adaptation with DIS Tester: refer to Service
Function in DIS Tester.
-
Teach in clutch valve characteristic value
-
Adapt SMG transmission completely
-
Teach in clutch slipping point
-
Check transmission oil level.
Use only the approved transmission fluid.
-
Read out fault memory and clear entered faults.
Failure to comply with this requirement will result in serious
damage to the manual transmission.
Necessary preliminary tasks:
•
Remove complete exhaust system.
•
Remove centre underbody protection.
•
Remove reinforcement plate.
Important notes on installation are described in this work
step.
RA Removing and installing transmission (GS7S47BG SMG)
BMW AG - TIS
19.01.2013 14:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
