6 Series M6 (S85) Coupe
23 00 123
Installing replacement transmission
(GS7S47BG SMG)
Important!
After completing work:
-
Carry out adaptation using DIS Tester, refer to "Service
Functions" in DIS Tester.
-
Teach in clutch valve characteristic value
-
Adapt SMG transmission completely
-
Teach in clutch slipping point
-
Check transmission oil level.
Use only the approved transmission fluid.
-
Read out fault memory and clear entered faults.
Failure to comply with this requirement will result in serious
damage to the manual transmission.
Important!
After the running-in phase of 2000 km it is essential to carry
out a transmission oil change.
Failure to comply with this requirement will result in serious
damage to the manual transmission.
Recycling:
Catch and dispose of escaping transmission oil. Observe country-
specific waste-disposal regulations.
RA Installing replacement transmission (GS7S47BG SMG)
BMW AG - TIS
19.01.2013 14:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -