6 Series M6 (S85) Coupe
23 11 607
Replacing guide tube for clutch release unit
(GS7S47BG SMG)
Necessary preliminary tasks:
•
Remove transmission
•
Remove clutch release unit and release lever from guide
sleeve
Release screws.
Remove guide sleeve.
Tightening torque 23 11 2AZ
.
Installation:
Replace screws.
Clean new guide sleeve.
Guide surface must be clean (no labels/stickers or residual
adhesive, etc.).
Important!
Apply a thin film of Esso Unirex grease to guide tube.
Grease, refer to BMW Service Operating Fluids.
RA Replacing guide tube for clutch release unit (GS7S47BG SMG)
BMW AG - TIS
19.01.2013 14:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
