6 Series M6 (S85) Coupe
31 11 001
Replacing front axle carrier (M5, M6)
Warning!
Danger to life!
Secure engine in installation position to prevent it from falling
down.
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Secure engine in installation position
•
Remove front wheels
•
Remove stabilizer
•
Remove reinforcement plate
•
Remove steering gear cover on both sides
•
Remove wheel suspension cover on both sides
•
Remove lower steering spindle from power steering gear
•
Disconnect plug connection on EH converter and expose line
up to engine carrier
•
Disconnect plug connection on ride-height sensor and
expose line up to engine carrier
•
Remove tension strut on both sides from front axle carrier
•
Remove jointed rod of ride-height sensor from control arm
•
Remove control arm on both sides from front axle carrier
•
Remove left tie rod from power steering gear
•
Remove right tie rod end from swivel bearing
•
Detach heat shield for power steering gear from front axle
carrier
•
Remove power steering gear from front axle carrier and tie up
RA Replacing front axle carrier (M5, M6)
BMW AG - TIS
19.01.2013 14:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
