6 Series M6 (S85) Coupe
Expose return line up to connection on power steering gear.
Release banjo bolt (1) and remove return line (2).
Installation:
Replace all sealing rings.
Make sure hydraulic line is laid without tension and with sufficient
spacing to adjoining components.
Tightening torque 32 41 3AZ
.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Replacing return line for power steering (S85)
BMW AG - TIS
19.01.2013 15:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -