6 Series M6 (S85) Coupe
This work step must be carried out with a second person assisting.
Lock clamping elements (3).
Turn clamping elements (4) through 90
°
and lock.
Align step between roof and A-pillar or roof and C-pillar with emerging adhesive. Remove excess adhesive.
Important!
Never use cleaning agents!
Do not leave any traces of sharp edges as this could compromise the tightness of the subsequent bond.
Important!
The clamping fixture remains on the car.
Do not move the car with the clamping fixture.
Check whether reference bead has hardened after 2 hours curing time (15
°
C to 25
°
C).
Then remove clamping fixture.
Mechanically remove vertically protruding adhesive from roof trim strip channel in areas (1).
Mechanically remove adhesive that has escaped in areas (2).
The endurance strength of the structural bond is achieved after 12 hours at 20
°
C.
Carry out leak test.
RA Replacing roof outer skin (CFK roof version)
BMW AG - TIS
19.01.2013 16:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
