6 Series M6 (S85) Coupe
51 11 156
Removing and installing front bumper trim
(M6)
Important!
Risk of mixing up
Different screws fitted.
Raise bonnet/hood.
Release screws (1) on bumper trim (2).
Release screws (1) on bumper trim (2).
Note:
The operation is described on the left side; proceed in the same
way for the right side.
Release screws (1) on wheel arch trim (2).
RA Removing and installing front bumper trim (M6)
BMW AG - TIS
19.01.2013 16:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
