6 Series M6 (S85) Coupe
51 16 214
Removing and installing/replacing trim for
preselector lever (M5, M6)
Lever out gaiter (1) at catches (2).
Reach into trim (1) and unclip upwards from retainers (2).
Important!
Risk of damage!
Gaiter (1) can be damaged on trim (2) when fed out.
Press gaiter (1) together slightly and feed out through trim (2).
Disconnect plugs (1 and 2).
Remove finisher strip (3).
Installation:
Plug connection (2) must be correctly clipped into trim (3).
RA Removing and installing/replacing trim for preselector lever (M5, M6)
BMW AG - TIS
19.01.2013 16:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
