bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

9 RA Removing And Installing_replacing Retaining Ring On Left Or Right Door Mirror (M > < 7 RA Removing And Installing_replacing Housing On Left Or Right Door Mirror (M5_M6)
Page 1
background image

51 16 041

Removing and installing/replacing cover cap
on left or right door mirror

Necessary preliminary tasks:

Remove retaining ring on door mirror

Release screws (1).

Tightening torque 51 16 9AZ

.

Release cover cap (1) from catches (2) and feed out in direction
of arrow.

Disconnect connector (3).

Installation:

Make sure wiring of door mirror light is correctly routed.

Installation:

Catches (1) on cover cap (2) must not be damaged.

3

Light

4

Catches

RA  Removing and installing/replacing cover cap on left or right door mirror

BMW AG - TIS

19.01.2013  16:40

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

9 RA Removing And Installing_replacing Retaining Ring On Left Or Right Door Mirror (M > < 7 RA Removing And Installing_replacing Housing On Left Or Right Door Mirror (M5_M6)