bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

14 RA Removing And Installing _ Replacing Front Underbody Protection > < 12 RA Removing And Installing _ Replacing Front Carpet For Passenger Compartment
Page 1
background image

51 47 440

Removing and installing/replacing rear carpet
on seat pan

Necessary preliminary tasks:

Remove left/right front seat

Remove handbrake lever

Remove vehicle centre sensor

Remove rear left/right side trim

Remove front inside entrance cover strip

Disconnect connector (1).

Lay cable (2) back.

Feed out cables (3 and 4) through carpet (5).

Remove carpet (5).

Installation:

Make sure openings for air duct and attachment points are
correctly positioned.

Make sure all cables are in correct position.

RA  Removing and installing/replacing rear carpet on seat pan

BMW AG - TIS

19.01.2013  17:16

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

14 RA Removing And Installing _ Replacing Front Underbody Protection > < 12 RA Removing And Installing _ Replacing Front Carpet For Passenger Compartment