6 Series M6 (S85) Coupe
front-passenger sides).
The driver-side setting applies for both sides in the area of the windscreen.
>E64
When the convertible program is active, air distribution is switched to the upper body and head. Airflow to
the footwell is throttled.
•
A/C program
The A/C program is called up as follows:
1.
Press the controller in the start menu (5. menu)
2.
Select "Vehicle settings" and press controller.
3.
Select "A/C settings" and press controller.
4.
The following settings are available in the menu level "automatic program":
- low
- medium
- high
- convertible program (selection only possible when convertible top is open)
The selection of low, medium and high is not possible when the convertible program is active.
When the convertible program is deactivated, the air-conditioning system acts as if the convertible top
were closed (selection of low, medium and high is again possible).
The following control unit is also active in the IHKA:
-
Convertible top module (E64 only)
The convertible top module (CVM) provides the IHKA control unit with the signal whether the convertible top is
open or closed. The convertible top module is connected to the K-CAN.
The convertible top module is installed under the rear left side trim.
System functions
The IHKA comprises the flowing functions:
-
Temperature control
-
Evaporator control
-
Air distribution setting
-
Airflow control
-
Sunlight adaptation (solar sensor, IHKA High only)
-
MAX cooling (IHKA High only)
-
Maximum heating
-
Residual heat (IHKA High only)
-
Defrost function (IHKA High only)
-
Heated rear window
-
Heated washer jets
-
OFF
-
Air recirculation mode
-
Automatic air recirculation
SBT Integrated automatic heating / air-conditioning system (IHKA), Basic and High E6
BMW AG - TIS
19.01.2013 23:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -