6 Series E64 635d (M57T2) CONVER
11 61 360
Removing and installing / replacing right
pressure pipe (charge air hose) (M57T2)
Necessary preliminary tasks:
•
Remove underbody protection
•
Remove air intake hose
Important!
Pressure pipes cannot be fitted without antiseize agent.
Damaged shaped sealing rings will result in a pressure loss,
risk of damage to turbocharger.
Loosen screw (2).
Release screw (1).
Turn retaining ring in direction of arrow.
Disconnect pressure pipe.
Unlock locking clip (1) in direction of arrow.
Release pressure pipe (2) in direction of arrow.
RA Removing and installing / replacing right pressure pipe (charge air hose) (M57T2
BMW AG - TIS
02.02.2013 20:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
