6 Series E64 635d (M57T2) CONVER
13 62 585
Removing and installing/replacing pressure
sensor for exhaust system (M57TU TOP)
Important!
Make sure your hands are clean.
Avoid contamination by lubricants and greases that contain
oil.
Necessary preliminary tasks:
•
Read out DME fault memory
Release plug connector (1) and pull off.
Remove hose (2).
Unlock locking clip (3) and remove pressure sensor (4) in
direction of arrow.
Check function of DME.
RA Removing and installing/replacing pressure sensor for exhaust system (M57TU TOP)
BMW AG - TIS
02.02.2013 21:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
