6 Series E64 635d (M57T2) CONVER
13 71 140
Replacing intake manifold (between air-mass
flow sensor and exhaust turbocharger)
(M47T2, M57T2)
Necessary preliminary tasks:
•
E87, E83, E90, E91 only: Remove intake duct
•
M47T2: Remove acoustic cover at front
•
M57T2: Remove acoustic cover
E87, E83, E90, E91 only:
Release screws (1).
Detach intake manifold (2) in direction of arrow.
Installation:
Make sure intake manifold (2) is correctly seated on exhaust
turbocharger.
Make sure connecting hose (3) is correctly seated.
E60, E61:
Release screws (1).
Detach intake manifold (2) in direction of arrow.
Installation:
Make sure intake manifold (2) is correctly seated on exhaust
turbocharger.
Make sure connecting hose (3) is correctly seated.
RA Replacing intake manifold (between air-mass flow sensor and exhaust turbocharger
BMW AG - TIS
02.02.2013 21:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
