6 Series E64 635d (M57T2) CONVER
31 10 010
Removing and installing/replacing
reinforcement plate
Important!
Observe safety instructions for raising the vehicle
Driving without reinforcement plate and structural tension
struts is not permitted!
Necessary preliminary tasks:
•
Remove underbody protective plate
•
Remove front left structural tension strut
•
Release front right structural tension strut
Release screws (1) and remove reinforcement plate.
Installation:
Replace screws and insertion nuts.
Tightening torque 31 10 9AZ
.
RA Removing and installing/replacing reinforcement plate
BMW AG - TIS
02.02.2013 22:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -