6 Series E64 635d (M57T2) CONVER
32 33 001
Removing and installing/replacing steering
wheel
Note:
Wheel/chassis alignment is not necessary after the steering wheel
has been removed and installed or replaced.
Necessary preliminary tasks:
•
Remove airbag unit
Move sport steering wheel to straight-ahead position.
Disconnect plug connection (1).
Release screw (2) and remove steering wheel.
Secure volute spring cassette with adhesive tape against twisting.
Installation:
Make sure connecting lead(s) is/are correctly laid.
Tightening torque 32 33 1AZ
.
Installation:
Align steering wheel using markings (1) to steering column and
attach.
RA Removing and installing/replacing steering wheel
BMW AG - TIS
02.02.2013 23:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -