Replacing Return Line for Power Steering on 6 Series E64 635d (M57T2)
Expose return line up to connection on power steering gear.
Release banjo bolt (1) and remove return line (2).
Installation:
Replace all sealing rings.
Make sure return line is laid without tension and with sufficient
spacing to adjoining components.
Tightening torque 32 41 3AZ
.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Replacing return line for power steering (M57T2)
BMW AG - TIS
02.02.2013 23:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
