6 Series E64 635d (M57T2) CONVER
Ideal adjustment:
Close convertible top.
Door window glass (1) must rest in seal (2) over entire width.
Door window glass (3) must rest in area (A) on door window
seal (4) (wind noises, water ingress).
Vertical adjustment (A) (retraction depth):
-
Close convertible top
-
Open door window
-
Attach special tool 51 3 080 to door window glass
-
Close door window completely
-
Measure retraction depth
Note:
3 items of special tool 51 3 080 are required for rapid
adjustment of retraction depths.
Ideal adjustment:
Measure retraction depth in areas (1 and 2).
Dimension (C) = 7
±
0.5 mm
Slacken screws (1) with Torx T30 (do not release fully).
Slacken nut (2) with special tool 41 6 120 (do not release fully).
Adjust height (A) of door window (3), tighten down screws (1)
and nut (2).
Installation:
Tightening torque:
1
51 37 2AZ
2
51 37 7AZ
RA Adjusting rear left or right side windows
BMW AG - TIS
03.02.2013 03:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -