6 Series E64 635d (M57T2) CONVER
Installation:
Front strap (1) must be fitted in twisted condition.
Tension cable (2) must be above front strap (1), see marked
area.
Pull welt of roofliner (1) out of convertible top frame.
Release Torx screw (2).
Installation:
Replace Torx screws and insert with Loctite.
Pull welt of roofliner (1) out of convertible top frame.
Installation:
Make sure retainers are correctly seated on welt.
Remove roofliner from car.
RA Removing and installing or replacing headlining in convertible top
BMW AG - TIS
03.02.2013 04:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -