6 Series E64 635d (M57T2) CONVER
54 62 005
Removing and installing/replacing rollover
protection
Warning!
Danger of injury!
When the actuators are electrically activated, there must be
no persons present in the vicinity of the rollover protection
bars.
When a rollover protection bar is mechanically triggered, only
one person may be present underneath the protection bar.
Important!
When the actuators are activated, both rollover protection
bars are simultaneously triggered.
Trigger rollover protection bar.
Necessary preliminary tasks:
•
Stow convertible top in convertible top compartment (open)
and support convertible top compartment lid in service
position
•
Disconnect plug connection for back-up antenna
•
Remove air outlet trim grill
•
Remove ski bag
Unlock plug connection (1) on left and right and disconnect.
RA Removing and installing/replacing rollover protection
BMW AG - TIS
03.02.2013 05:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -