6 Series E64 635d (M57T2) CONVER
Unlock plug (1) and remove.
Release screws (2).
Remove cover (3) in direction of arrow.
Installation:
Ensure correct cable routing.
Make sure seal is correctly seated in cover (3).
Release screws (1).
Remove fan for heater - A/C unit (2) in direction of arrow.
Installation:
Make sure fan for heater - A/C unit (2) is correctly seated.
Replacement:
Unlock controller for heater - A/C unit fan (1) with a suitable
screwdriver (2) and remove.
Unlock plug connections (3) and disconnect.
Installation:
Make sure controller for heater - A/C unit fan (1) is correctly
seated.
RA Removing and installing/replacing heater - A/C unit fan
BMW AG - TIS
03.02.2013 07:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -