6 Series E64 645Ci (N62) CONVER
Unfasten screws.
Remove spacer (3) upwards.
Replace seal.
Remove injection pipe.
Release screw connections (1, 2, 3 and 4).
Remove cylinder-head cover.
Installation:
Note installation direction of sealing ring (1).
Groove in sealing ring (1) points outwards.
Replace sealing ring (1) and press into cylinder head cover until
flush.
RA Removing and installing/sealing right cylinder head cover (N62/N62TU)
BMW AG - TIS
04.02.2013 04:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -